Ford Bronco Tires

The correct tire size, bolt pattern, and tire pressure are crucial for maintaining the performance, safety, and fuel efficiency of a Ford Bronco. Specifically, the tire size directly influences the vehicle's handling, ground clearance, and speedometer accuracy. An inappropriate tire size can lead to inaccurate speed readings, reduced handling, or even tire rub against the vehicle's body or suspension components. The bolt pattern, equally important, must match precisely to ensure that the tire fits securely onto the wheel hub. A mismatch in the bolt pattern can lead to vibrations, uneven tire wear, and potentially, the wheel detaching while driving. Tire pressure plays a pivotal role in optimizing the vehicle's contact with the road, affecting traction, braking, and cornering abilities. Properly inflated tires ensure the best balance between fuel efficiency and tire longevity, while under-inflated or over-inflated tires can lead to decreased performance, increased wear, and a higher risk of tire failure. For Ford Bronco owners, adhering to the vehicle manufacturer's specifications for tire size, bolt pattern, and tire pressure is essential to safeguard the vehicle's operational integrity, maximize safety for all occupants, and preserve the vehicle's overall value.

Ford Bronco Tire Size

The original equipment manufacturer (OEM) tire size refers to the specific dimensions and type of tires that manufacturer recommends for your Ford Bronco model. These dimensions are meticulously calculated to match the vehicle's weight, speed capabilities, handling features, and braking system. The OEM tire size usually includes the tire's width, aspect ratio, construction, and diameter, all of which are important for achieving the manufacturer's intended vehicle performance.

Original equipment tires for Ford Bronco may vary based on the year of production and the specific model trim. Some of the most common tire sizes for Ford Bronco are LT285/70R17, LT315/70R17, 255/70R16, 255/75R17 and LT265/70R17. It is imperative to confirm the exact tire size of your Ford Bronco before installing new tires. Always refer to the vehicle owner's manual for the correct tire size designated by vehicle's manufacturer.

Select your Ford Bronco production year to see its OEM tire size based on model trim.

Vehicle Tire Size
2025 Ford Bronco LT315/70R17
LT285/70R17
255/70R16
LT265/70R17
255/75R17
255/70R18
37x12.50R17
2024 Ford Bronco LT315/70R17
LT285/70R17
255/75R17
LT265/70R17
255/70R18
37x12.50R17
2023 Ford Bronco LT315/70R17
LT285/70R17
255/70R16
255/75R17
LT265/70R17
255/70R18
37x12.50R17
2022 Ford Bronco LT285/70R17
LT315/70R17
255/70R16
255/75R17
LT265/70R17
255/70R18
37x12.50R17
2021 Ford Bronco LT285/70R17
LT315/70R17
255/70R16
255/75R17
LT265/70R17
255/70R18
1996 Ford Bronco P235/75R15
P265/75R15
1995 Ford Bronco P235/75R15
P265/75R15
1994 Ford Bronco P235/75R15
31x10.50R15
1993 Ford Bronco P235/75R15
31x10.50R15
1992 Ford Bronco P235/75R15
31x10.50R15
1991 Ford Bronco P235/75R15
31x10.50R15
1990 Ford Bronco P235/75R15
31x10.50R15

The proper tire size for a Ford Bronco is not just a detail; it's a critical component of the vehicle's performance, safety, and efficiency. This iconic SUV, known for its rugged durability and adaptability across various terrains, demands a tire size that aligns perfectly with its specifications to maintain its esteemed capabilities. The right tire size ensures optimal traction, handling, and stability, whether navigating tight city streets or exploring off-road trails, thereby enhancing the driver's control and the vehicle's responsiveness to steering inputs. Importantly, the correct tire size also plays a vital role in maintaining accurate speedometer readings, proper alignment, and the effectiveness of the anti-lock braking system (ABS), directly impacting fuel efficiency and reducing the risk of premature tire wear. For owners of a Ford Bronco, adhering to the manufacturer-recommended tire size is essential not only for preserving the vehicle's integrity and performance but also for ensuring the safety of its occupants during every adventure.

Best Tires for Ford Bronco

Selecting the best tires for a Ford Bronco embodies a task that requires consideration of various aspects due to the vehicle's unique blend of off-road capability and on-road comfort. The prime step involves assessing the vehicle's specific use cases: whether the focus is on off-roading, highway driving, or a balance of both. For avid off-roaders, tires with aggressive tread patterns, reinforced sidewalls, and higher durability ratings are paramount, enhancing grip and resistance against punctures on rugged terrains. Popular choices often fall within the All-Terrain (A/T) or Mud-Terrain (M/T) categories. On the other hand, for drivers primarily navigating highways and urban environments, seeking tires with lower road noise, improved fuel efficiency, and enhanced wet and dry traction is key; here, Touring or All-Season tires are advisable. The Bronco's OEM tire size should be used as a starting point, yet variations in size and aspect ratio can be considered for specific performance enhancements, keeping in mind the potential need for adjustments to vehicle suspension or calibration to maintain accurate speedometer readings and handling characteristics. Additionally, considering the load rating is essential to ensure the tires can support the vehicle's weight and potential cargo effectively. Lastly, consulting reviews and ratings from reputable automotive publications and forums, alongside recommendations from tire manufacturers familiar with the Ford Bronco's specifications, can provide invaluable insights, ensuring the selection perfectly aligns with performance expectations and driving conditions.

Here are some of the popular tire models that fit select Ford vehicles.

Ford Bronco Tire Pressure

Recommended tire pressure for Ford Bronco can range from 35 psi to 41 psi depending on year of production, trim and OEM tire size.

Maintaining the recommended tire pressure for a Ford Bronco is essential not only for ensuring optimal vehicle performance but also for enhancing safety and efficiency. The correct tire pressure, specified by Ford, optimizes the contact between the tires and the road surface, providing better grip, which is crucial for handling and braking, especially in challenging driving conditions. Moreover, tires inflated to the appropriate pressure level offer improved fuel efficiency, as under or over-inflated tires can lead to increased rolling resistance, making the engine work harder and thus consume more fuel. Additionally, adhering to the recommended tire pressure helps in evenly distributing the vehicle's weight across the tire tread pattern, which slows down the rate of tire wear, extending the lifespan of the tires. This is particularly important for a vehicle like the Ford Bronco, which may be used on varying terrains, from urban roads to off-road conditions, where tire integrity and performance are paramount. Regularly checking and adjusting the tire pressure according to the manufacturer's specifications can prevent roadside emergencies and contribute to a safer, more economical, and environmentally friendly driving experience.

Ford Bronco Bolt Pattern

Bolt pattern for Ford Bronco can vary based on the production year of the model. The most common bolt pattern used in Ford Bronco is 6x139.7. It is imperative to confirm the exact bolt pattern for your Ford Bronco before installing new wheels. Make sure to refer to vehicle owner's manual for the proper bolt pattern or Pitch Circle Diameter (PCD) designated by vehicle's manufacturer.

The importance of adhering to the proper bolt pattern for a Ford Bronco cannot be overstated, as it directly impacts both the vehicle's performance and safety. The bolt pattern, essentially the arrangement of the bolt holes on the wheel, must precisely match that of the vehicle's hub to ensure that the wheel is centered and securely attached. A correct match prevents undue stress on the wheel studs or bolts, minimizes the risk of wheel detachment while driving, and ensures smooth transmission of power from the axle to the wheel. Moreover, using the appropriate bolt pattern preserves the integrity of the wheel hub and bearings, preventing premature wear and potential failure. It also ensures that the wheels are aligned correctly, contributing to even tire wear, optimal handling, and fuel efficiency. For the Ford Bronco, which might be used in a variety of demanding situations from off-roading to daily commuting, the correct bolt pattern is critical for maintaining the vehicle's reliability and performance under diverse conditions. Ignoring this crucial aspect can lead to significant safety hazards, including loss of control and accidents, as well as increased maintenance costs over time.

Ford Ford Bronco Tires

All listed guides, data and/or calculations are for informational purposes only. TireSizes.com does not warrant or make any representations regarding the accuracy of or the results of the use of this information. Always refer to vehicle owner's manual for the correct tire size configuration.